1 Mbit/s equals 0.001 Gbit/s. To convert Mbit/s to Gbit/s, multiply the value by 0.001; divide by 0.001 to convert back. Enter any number above and the result appears instantly — free and entirely in your browser.
How do you convert Mbit/s to Gbit/s?
The conversion formula is Gbit/s = Mbit/s × 0.001. The conversion factor is fixed by definition, so the result is always exact.
Mbit/s to Gbit/s conversion table
| Mbit/s | Gbit/s |
|---|---|
| 1 Mbit/s | 0.001 Gbit/s |
| 10 Mbit/s | 0.01 Gbit/s |
| 50 Mbit/s | 0.05 Gbit/s |
| 100 Mbit/s | 0.1 Gbit/s |
| 250 Mbit/s | 0.25 Gbit/s |
| 1,000 Mbit/s | 1 Gbit/s |
What is Mbit/s (Mbit/s)?
A megabit per second (Mbit/s) is one million bit/s and the unit internet plans are sold in. Divide by eight for the download speed you see: 100 Mbit/s is at most 12.5 MB/s.
What is Gbit/s (Gbit/s)?
A gigabit per second (Gbit/s) is 1,000 Mbit/s. Gigabit Ethernet and fibre plans use it; a full 1 Gbit/s carries at most 125 MB/s — one gigabyte in eight seconds.
Why convert Mbit/s to Gbit/s?
Internet plans are sold in megabits per second, downloads run in megabytes per second, and the factor of eight between them is the most common misunderstanding in the whole field. Storage tools add a second gap by counting in binary units (MiB/s).
Eight bits make one byte, so a 100 Mbit/s line carries at most 12.5 MB/s. EU Regulation 2015/2120 obliges fixed-line providers to state the minimum, normally available and maximum speed in the contract — the advertised figure is a ceiling, not a promise.
What can the converter not tell you?
This converter changes units, nothing else. It cannot tell you how fast a file will actually arrive: protocol overhead, Wi-Fi, the server at the other end and everyone else on the line all cost throughput, and a plan states the line rate, not the delivered rate. Only a measurement answers that question.
How to convert Mbit/s to Gbit/s
- Enter the value in Mbit/s into the left field of the converter.
- Read the result in Gbit/s instantly in the right field — it updates automatically.
- Use the swap button to reverse the direction (Gbit/s to Mbit/s).
The converter runs entirely in your browser: no uploads, no queue, no limits. You can even use it offline.