1 Mbit/s equals 0.119209 MiB/s. To convert Mbit/s to MiB/s, multiply the value by 0.119209; divide by 0.119209 to convert back. Enter any number above and the result appears instantly — free and entirely in your browser.
How do you convert Mbit/s to MiB/s?
The conversion formula is MiB/s = Mbit/s × 0.119209. The conversion factor is fixed by definition, so the result is always exact.
Mbit/s to MiB/s conversion table
| Mbit/s | MiB/s |
|---|---|
| 1 Mbit/s | 0.119209 MiB/s |
| 10 Mbit/s | 1.19209 MiB/s |
| 50 Mbit/s | 5.96046 MiB/s |
| 100 Mbit/s | 11.9209 MiB/s |
| 250 Mbit/s | 29.8023 MiB/s |
| 1,000 Mbit/s | 119.209 MiB/s |
What is Mbit/s (Mbit/s)?
A megabit per second (Mbit/s) is one million bit/s and the unit internet plans are sold in. Divide by eight for the download speed you see: 100 Mbit/s is at most 12.5 MB/s.
What is MiB/s (MiB/s)?
Mebibytes per second (MiB/s) uses the binary megabyte of 1,048,576 bytes. Linux tools and disk benchmarks report in MiB/s; 1 MiB/s equals 8.389 Mbit/s, about 4.9% more than 1 MB/s.
Why convert Mbit/s to MiB/s?
Internet plans are sold in megabits per second, downloads run in megabytes per second, and the factor of eight between them is the most common misunderstanding in the whole field. Storage tools add a second gap by counting in binary units (MiB/s).
Eight bits make one byte, so a 100 Mbit/s line carries at most 12.5 MB/s. EU Regulation 2015/2120 obliges fixed-line providers to state the minimum, normally available and maximum speed in the contract — the advertised figure is a ceiling, not a promise.
What can the converter not tell you?
This converter changes units, nothing else. It cannot tell you how fast a file will actually arrive: protocol overhead, Wi-Fi, the server at the other end and everyone else on the line all cost throughput, and a plan states the line rate, not the delivered rate. Only a measurement answers that question.
How to convert Mbit/s to MiB/s
- Enter the value in Mbit/s into the left field of the converter.
- Read the result in MiB/s instantly in the right field — it updates automatically.
- Use the swap button to reverse the direction (MiB/s to Mbit/s).
The converter runs entirely in your browser: no uploads, no queue, no limits. You can even use it offline.