1 MiB/s equals 8.38861 Mbit/s. To convert MiB/s to Mbit/s, multiply the value by 8.38861; divide by 8.38861 to convert back. Enter any number above and the result appears instantly — free and entirely in your browser.
How do you convert MiB/s to Mbit/s?
The conversion formula is Mbit/s = MiB/s × 8.38861. The conversion factor is fixed by definition, so the result is always exact.
MiB/s to Mbit/s conversion table
| MiB/s | Mbit/s |
|---|---|
| 1 MiB/s | 8.38861 Mbit/s |
| 10 MiB/s | 83.8861 Mbit/s |
| 50 MiB/s | 419.43 Mbit/s |
| 100 MiB/s | 838.861 Mbit/s |
| 250 MiB/s | 2,097.15 Mbit/s |
| 1,000 MiB/s | 8,388.61 Mbit/s |
What is MiB/s (MiB/s)?
Mebibytes per second (MiB/s) uses the binary megabyte of 1,048,576 bytes. Linux tools and disk benchmarks report in MiB/s; 1 MiB/s equals 8.389 Mbit/s, about 4.9% more than 1 MB/s.
What is Mbit/s (Mbit/s)?
A megabit per second (Mbit/s) is one million bit/s and the unit internet plans are sold in. Divide by eight for the download speed you see: 100 Mbit/s is at most 12.5 MB/s.
Why convert MiB/s to Mbit/s?
Internet plans are sold in megabits per second, downloads run in megabytes per second, and the factor of eight between them is the most common misunderstanding in the whole field. Storage tools add a second gap by counting in binary units (MiB/s).
Eight bits make one byte, so a 100 Mbit/s line carries at most 12.5 MB/s. EU Regulation 2015/2120 obliges fixed-line providers to state the minimum, normally available and maximum speed in the contract — the advertised figure is a ceiling, not a promise.
What can the converter not tell you?
This converter changes units, nothing else. It cannot tell you how fast a file will actually arrive: protocol overhead, Wi-Fi, the server at the other end and everyone else on the line all cost throughput, and a plan states the line rate, not the delivered rate. Only a measurement answers that question.
How to convert MiB/s to Mbit/s
- Enter the value in MiB/s into the left field of the converter.
- Read the result in Mbit/s instantly in the right field — it updates automatically.
- Use the swap button to reverse the direction (Mbit/s to MiB/s).
The converter runs entirely in your browser: no uploads, no queue, no limits. You can even use it offline.